Forge Motorsport High Flow Valve for Audi RS3 8V and TTRS 8S Cooper R50 R52 R53 Run 2 – into intercooler

Run 2 – into intercooler 152 degrees – out of intercooler going to engine 18 degrees

remove old water cooled oil cooler and fit new AIRTEC oil cooler plate with existing bolts and install pipe joiner to the 2 x 16mm i

If you require this actuator to be assembled with a standard spring suitable for the factory boost level please select Green Stock Vehicle from the drop-down list

keeping a purer air/fuel mixture and avoiding the problem of slowly filling intercooler and intake pipework with oil

Forge Motorsport High Flow Valve for Audi RS3 8V and TTRS 8S Cooper R50 R52 R53 Run 2 – into intercoolerProduct Description We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner This valve kit is an evolution of the FMARSDV dump valve we market for the 8P chassis RS3. It was developed for those who have tuned, or plan to tune, their 8S chassis Audi TTRS or 8V chassis Audi RS3 in excess of 450hp. Audi have seen fit to not change the design of the OEM dump valve from the previous RS3, so the same issues are carried over