Silicone Mould - 3D Bullets - S354 disney princess keep below 50 degrees/c (122

keep below 50 degrees/c (122 degrees/f)/ *DO NOT wash in dishwasher

The whole process (of breaking down) can take anywhere between two days and two weeks depending on the amount of invertaste you have used

Important note: The sheets are extremely delicate so care must be taken when taking them out of packaging and applying to product

Single Images are to be in PNG / JPEG / BMP Format if editing or change of template size is required

Silicone Mould - 3D Bullets - S354 disney princess keep below 50 degrees/c (122Instructions: For the best details, lightly dust the mould with cornflour or icing sugar. Press in small amount of sugar paste, gumpaste or fondant, roll gently over the silicone mould with the rolling pin and remove the excess paste with the sharp knife. Tip: For a easy release, put the mould in a freezer for about 30 seconds, or bit longer if needed. Once the gum paste has hardened up a bit, turn the mould over, and the item should pop out easily.