015: PL 2-6S BEC 1x5.35V (Shipment 15th of August 2026) The main purpose of this

The main purpose of this hub is to replace existing protection circuits (like an ideal diode) and to monitor

plus spare BEC connectors after the switch and before the switch

The voltage reading of the LiPo is optimized for up to 14S LiPo packs

5mm / 45g (with 2x 15cm 8AWG)

015: PL 2-6S BEC 1x5.35V (Shipment 15th of August 2026) The main purpose of thisUser Manual: DOWNLOAD Input 2 6S LiPo max. 28V. Output 5. 35V 3A > + 0. 05V > Ripple 10mV (0. 2%) at 1. 5A output current. Inclusive LDO power supply (+5. 00V + 0. 03V) for the sensor board PL xxx as well as PL Sensor Hub X2 and output connector with Molex Clik Mate 4p. Input wrong polarity protection, as well as TDK input and output capacitors to prevent burnout of the UBEC from voltage spikes. Blue power "ON' LED. 34mm x 22mm x 7mm 7g without CFK